Radiant Floor Heating - Takagi Tankless Water Heaters

Flash T-K3 Jr.

The T-K3 Jr. is the smallest unit in the Takagi line-up and offers direct vent capability and power. The T-KJr is perfect for light residential (i.e. small apartment units) and radiant heating applications.

Released in 2003, the T-K Jr. is the smallest water heater in the Takagi tankless line. But this small, but powerful unit - with gas inputs up to 140,000 BTU per hour - can meet all the hot-water needs of a small American home or apartment with one or two bathrooms, as well as smaller commercial applications. Designed to virtually do anything a 40-gallon tank-type water heater can do and more, the compact, wall mounted T-K Jr. can support hydronic baseboard or radiant floor heating applications, as well as provide domestic hot water to plumbing fixtures and appliances.

The T-K Jr. has an efficiency rating of 83%, using natural gas, and 84% with propane. At an average ∆T (rise in temperature) of 60°F in warmer areas - where the winter ground water is 60°F and with the output set at 120°F - the unit will provide 3.8 GPM, or 228 GPH. In colder areas where the input temperature may be 40°F or less you can expect a flow rate of about 2.7 GPM or 162 GPH.

Cost-efficient and environmentally friendly, the T-K Jr. can be converted into a direct-vent unit by using the optional TV09 conversion kit for installation in a garage, a utility closet or any confined space in which makeup air may be limited. Please refer to "Accessories" for more information on venting options.

Using the average of 60°F input water cited above, the T-K Jr. can provide enough hot water for one shower and a lavatory basin at a time; or one low-flow shower (2.5 GPM or less) and an appliance, such as a dishwasher or washing machine, at the same time. For much colder input temperatures, such as 40°F or lower, this unit can provide endless hot water for consecutive uses; that is, running only one major fixture at a time. Please refer to the flow charts for specific rates.

The four preset temperatures on the unit are: 113°F, 122°F, 140°F, and 182°F. To achieve any temperatures other than those presets, your client will require the TK-RE20 temperature controller.

Please call an Eagle Mountain representative for ordering the proper Takagi mounting hardware, vent kits and accessories for your specific installation.

Hydronic Control Panels

Small Panel



"If I decide to spec a radiant system again I'll give you a call. I really appreciate the help you provided even when it wasn't your problem."
Erik –Cleveland, OH

“Control panel arrived in good shape and is working as advertised.  Thanks.
” Dennis – Washington, DC.

"Thank you to Eagle Mountain and their employees for the help and advice so professionally supplied. I would, and have, recommended your company to friends and family. "
Russ -- Rochester, NY


Home | Geothermal Systems | Radiant Heating Systems | Solar | Energy Management | Control Panels | Contact | Español
Suelo Radiante | Geotermica | Manejo de Energia