Radiant Floor Heating - Bradford White Water Heaters

Bradford White gas water heaters
natural gas and propane

Bradford White’s basic gas through-the-wall power-vented model, the TTW1 can be vented vertically or horizontally directly through the nearest outside wall.

• Intermittent Pilot Ignition System - no standing pilot
• Can be vented both horizontally and vertically
• May be installed up to 30' from outside wall with 2" PVC vent pipe and 3 elbows
• May be installed up to 90' from outside wall with 3" PVC vent pipe and 3 elbows
• Agency approved for use with schedule 40 ABS, schedule 40 PVC and schedule 40 CPVC
• Power vented for positive exhaust
• Vitraglas lining
• Protective magnesium anode rod
• Factory installed dielectric waterway fittings
• Factory installed Hydrojet Total Performance System
• Smart Valve control
• T&P relief valve opening on side of tank
• Smart Valve control
• Slider Combustion Chamber Door
• Brass drain valve
• 1" Non-CFC foam insulation

Call 1-800-572-7831 or e-mail Eagle Mountain for more information.

Similar to Bradford White’s TTW1 models, the TTW2 offers higher BTU inputs, two inches of insulation and an 80% recovery efficiency. Just like the TTW1, the TTW2 offers extremely flexible venting options.

• Intermittent Pilot Ignition System - no standing pilot
• Can be vented both horizontally and vertically
• May be installed up to 30' from outside wall with 2" PVC vent pipe and 3 elbows
• May be installed up to 90' from outside wall with 3" PVC vent pipe and 3 elbows
• Agency approved for use with schedule 40 ABS, schedule 40 PVC and schedule 40 CPVC
• Power vented for positive exhaust
• Vitraglas lining
• Protective magnesium anode rod
• Factory installed dielectric waterway fittings
• Factory installed Hydrojet Total Performance System
• Smart Valve control
• T&P relief valve opening on side of tank
• Slider Combustion Chamber Door
• Brass drain valve
• 2" Non-CFC foam insulation

Call 1-800-572-7831 or e-mail Eagle Mountain for more information.

Bradford White's Energy Saver line with Defender Safety System
These conventional (atmospheric) vent water heaters are the time-tested workhorses of water heaters. Unlimited flow rates and large stand-by supplies of hot water make this design the most popular style across a wide geographic area. 75 and 100-gallon models do not include Defender Safety System.

Defender Safety System features:

• Advanced ScreenLok® Technology Flame Arrestor design
• Resettable thermal switch
• Piezo ingiter
• Maintenance free
• Pedestal base
• Sight window

Standard Energy Saver features:

• Fully automatic controls
• Factory installed Hydrojet Total Performance System
• Vitraglas lining
• Factory installed dielectric waterway fittings
• Protective magnesium anode rod
• "3" x "4" Snap-Lock draft diverter on 40,000 BTU/Hr. or less models
• T&P relief valve included
• Brass drain valve
• 1" Non-CFC foam insulation (except where noted)