Posts Tagged ‘high velocity’

Process to change Geothermal from Heating to Cooling

Monday, June 7th, 2010
Jason Murphy

Jason Murphy

Geothermal systems provide both heating and cooling.

If you have a forced-air geothermal system using a water-to-air geothermal heat pump, simply change your thermostats from heating to cooling mode, and you are done. Forced-air geothermal systems are the easiest to change from heating to cooling mode.

Cooling with Hydronic Geothermal Heat Pumps

If you have a radiant heating system, your hydronic geothermal heat pump provides cooling via high-velocity or low-velocity air handlers.

Step 1: Locate your Hydronic Control Panel

If you have a hydronic system, the first step is to locate your hyrdonic control panel in the mechanical room.  You control panel will look like this:

Hydronic Control Panel

Hydronic Control Panel

Step 2: Determine if you have 1 or 2 Tekmar Controls

The device that tells your heat pump to make either hot or cold water is a Tekmar 152 two stage setpoint control.  Your control panel will either have one or two Tekmar controls.