Stiebel Eltron: solar mounting hardware & accessories

Mounting Frame for two collectors (vertical installation)
Mounting frame for two SOL 25 Plus collectors. For vertical installations. In combination with the BP, BW, BF S and BF W mounting hardware sets, permits installation on wood / shingled roofs, metal roofs, flat roofs or walls. Can also be used to mount one collector, horizontal.

Mounting Frame for one collector (vertical installation)
Mounting frame for one SOL 25 Plus COllector. For vertical installations. In combination with the BP, BW, BF S and BF W mounting hardware sets, permits installtion on wood / shingled roofs, metal roofs, flat roofs or walls.

45° Mounting hardware (horizontal orientation)
For horizontal installation on a flat roof or wall. Two needed per frame.

Contains:
• 1 support, vertical
• 1 support, transverse
• 1 support, horizontal
• 1 brace
• 1 set each M 10 & M 6 nuts and bolts

45° Mounting hardware (vertical orientation)
For vertical installation on a flat roof or wall. Two needed per frame.

Contains:
• 1 support, vertical
• 1 support, transverse
• 1 support, horizontal
• 1 brace
• 1 set each M 10 & M 6 nuts and bolts

 

Frame tilt system
Frame tilt system for adjusting tilt on roofs 10 to 30 degrees. Two needed per frame.

Contents:
Adjustabe riser strur set
• 1 Brace
• 5 sets M 10 nuts and bolts
• 4 L brackets
• 1 Collector rail
• 5 sets M 6 x 2 nuts and bolts

 

Flush mount kit
One needed per frame.

Contents:
• 4 L brackets
• 2 collector rails
• 8 sets M 10 nuts and bolts

 

 

 

 

Frame connector kit
Frame connector kit to join multiple roof mounting frames for a row of collectors.

Contents:
• 2 Frame connectors
• 8, M 10 nuts and bolts

 

 

Flexible stainless steel insulated tube
This flexible connection tube will provide the plumbing connection between two collectors.

 

 

Solar pump station
• Panel mounted
• Circulator
• 1 Expansion tank
• 1 Retern thermometer
• Goldline controller
• 2 10K sensors
• 2 Boiler drains
• 1 Pressure releif valve
• 1 Check valve
• 1 Flowmeter
• 1 Temp / pressure guage
• 1 Air vent

 

 

 

 

Goldline controller
• Goldline differential controller
• Line cord outlet for circulator

 

 

 

 

10K Strap on sensor
10K Strap / bolt on sensor for Goldline controller

 

 

10K Immersion sensor
10K Immersion well type sensor for Goldline controller

 

 

Glycol - 20 liters / 5.28 gallons
Ready-to-use mixture

 

 

 

 

Sensor well
Well for sensor, used in conjuction with solar differential controller


Solar Accessories:
Click here for mounting hardware and solar accessories that are available for the solar hot water panels.


Home | Geothermal Systems | Radiant Heating Systems | Solar | Energy Management | Control Panels | Contact | Español
Suelo Radiante | Geotermica | Manejo de Energia